RF JUMPER STRAIGHT (1/2"S)
| Jumper Type | DIN(M)-DIN(M) | DIN(M)-DIN(F) | DIN(M)-N(M) | DIN(M)-N(F) | N(M)-N(M) | N(M)-N(F) | DIN(F)-N(M) | DIN(F)-N(F) |
| Model | SA12JDMDM | SA12JDMDF | SA12JDMNM | SA12JDMNF | SA12JNMNM | SA12JNMNF | SA12JDFNM | SA12JDFNF |
SPECIFICATION
| Interface | |
| According to | IEC 60169-4, VG 95250, EN 122190, DIN 47223 (DIN 7/16) IEC 60169-16, MIL-PRF-39012, CECC22210 (N) |
| Mechanical Data | |
| Min. bending radius,single | 25 mm |
| Min. bending radius, repeated | 35 mm |
| Mechanical Data | ||
| Cable | Inner conductor Dielectric Outer conductor Jacket option |
Copper clad aluminium wire Highly foamed polyethylene Spiral corrugated copper tube PE/FRNC |
| Connector | Center contact Insulator Outer contact Gasket |
Brass/Silver-plated PTFE Brass/Alloy-Plated Silicone Rubber |
| Environmental Data | |
| Operation temperature | -45°C ~ 85°C |
| Vibration | MIL-STD-202, Meth.204,Cond.B |
| Shock | MIL-STD-202, Meth.213,Cond.B |
| Corrosion | MIL-STD-202, Meth.101 |
| Degree of Protection (mated pair) |
IP67 |
| RoHS | Compliant |
| ELECTRICAL DATA | |
| Impedance | 50±1 Ω |
| Frequency | DC-2.2GHz |
| Relative Velocity of Propagation | 81% |
| Return Loss | ≤-28 dB
800 - 1000 MHz ≤-26 dB 1700-2200 MHz |
| Insertion Loss | ≤0.10dB/m (cable) +0.1 dB (2 connectors) 900MHz ≤0.15dB/m (cable) +0.1 dB (2 connectors) 1800MHz ≤0.16 dB/m (cable) +0.1dB (2 connectors) 2200 MHz |
| Peak Power Rating | 16 KW |
| DC breakdown Voltage | 2500 V |
| Power Handling(at 20°C, Sea Level,VSWR 1.0) | 800W@1 GHz 500W@2 GHz |
| Insulation Resistance | ≥ 10 GΩ-Km |
| Intermodulation (3rd order) | ≤ -117 dBm |
| Intermodulation Test Method | Two +43 dBm Carriers |
| Standard Conditions |
| For attenuation, VSWR 1.0 , ambient temperature 20 °C |
| For Average Power, VSWR 1.0 , ambient temperature 40 °C |
| Inner conductor temperature 100 °C, no solar loading |
Note: It is our constant endeavor to improve our products. Thus there may be changes
in specifications. The updated one may be taken from local sales representative.
in specifications. The updated one may be taken from local sales representative.
