+91 11 43117900
Banner
RF JUMPER RIGHT ANGLED (1/2"S)
Jumper Type DIN(M)-DIN(M)RA DIN(F)-DIN(M)RA N(M)-DIN(M)RA
Model SA12JDMDMR SA12JDFDMR SA12JNMDMR
SPECIFICATION
Interface
According to IEC 60169-4, VG 95250, EN 122190,
DIN 47223 (DIN 7/16)
IEC 60169-16, MIL-PRF-
39012,CECC22210 (N)
Mechanical Data
Min. bending radius, single 25 mm
Min. bending radius, repeated 35 mm
Mechanical Data
Cable Inner conductor
Dielectric
Outer conductor
Jacket option
Copper clad aluminium wire
Highly foamed polyethylene
Spiral corrugated
copper tube PE/FRNC
Connector Center contact
Insulator
Outer contact
Gasket
Brass/Silver-plated
PTFE
Brass/Alloy-Plated
Silicone Rubber
Environmental Data
Operation temperature -45°C ~ 85°C
Vibration MIL-STD-202,Meth.204,Cond.B
Shock MIL-STD-202,Meth.213,Cond.B
Corrosion MIL-STD-202,Meth.101
Degree of Protection
(mated pair)
IP67
RoHS Compliant
ELECTRICAL DATA
Impedance 50±1 Ω
Frequency DC - 2.2 GHz
Relative Velocity of Propagation 81%
Return Loss ≤-26 dB 800-1000 MHz
≤-24dB
1700 - 2200 MHz
Insertion Loss ≤ 0.10 dB/m (cable) + 0.1 dB
(2 connectors) 900 MHz

≤ 0.15 dB/m (cable) + 0.1 dB
(2 connectors) 1800 MHz

≤ 0.16 dB/m (cable) + 0.1 dB
(2 connectors) 2200 MHz
Peak Power Rating 16 KW
DC breakdown Voltage 2500 V
Power Handling (at 20°C,
Sea Level,VSWR 1.0)
800 W @ 1 GHz
500 W @ 2 GHz
Insulation Resistance ≥ 10 GΩ-Km
Intermodulation (3rd order) ≤ -117 dBm
Intermodulation Test Method Two +43 dBm Carriers
Standard Conditions
For attenuation, VSWR 1.0 , ambient temperature 20 °C
For Average Power, VSWR 1.0 , ambient temperature 40 °C
Inner conductor temperature 100 °C, no solar loading
Note: It is our constant endeavor to improve our products. Thus there may be changes
in specifications. The updated one may be taken from local sales representative.