| Model Type |
SA158 CDM |
SA158 CDF |
SA114 CDM |
SA114 CDF |
SA 078 CDM |
SA 078 CDF |
SA 012 CDM |
SA 012 CDF |
| Connector Size |
1 5/8" Male |
1 5/8" Female |
1 1/4" Male |
1 1/4" Female |
7/8' Male |
7/8' Female |
1/2" Male |
1/2" Female |
| VSWR |
≤1.1 (0~2.2GHz) |
≤1.1 (0~2.2GHz) |
≤1.1 (0~2.2GHz) |
≤1.1 (0~2.2GHz) |
≤1.1 (0~3GHz) |
≤1.1 (0~3GHz) |
≤1.1 (0~3GHz) |
≤1.1 (0~3GHz) |
| Suitable Cables |
SHILPI 1 5/8" |
SHILPI 1 5/8" |
SHILPI 1 1/4" |
SHILP 1 1/4" |
SHILPI 7/8" |
SHILPI 7/8" |
SHILPI 1/2" |
SHILPI 1/2" |
| Packing |
1Pc in box |
1Pc in box |
1Pc in box |
1Pc in box |
1Pc in box |
1Pc in box |
1Pc in box |
1Pc in box |
Specification for din connectors
| ELECTRICAL DATA |
| Impedance |
50 Ω |
| Frequency |
DC-8.3GHz |
| Insertion Loss |
≤0.05dB |
| Center Contact Resistance |
≤0.4mΩ |
| Outer Contact Resistance |
≤1.5mΩ |
| Insultation resistance |
≥10000MΩ |
| Withstanding Voltage AC (v/min) |
≥4000V |
| Power Handling |
1800W@1GHz 800W@4GHz |
| RF Leakage |
128dB@1GHz |
| Intermodulation (3rd order) |
≤-160dBc@2x20W |
| Retention for all female Connectors |
6~18N |
| Mechanical Data |
| Mating cycles |
min. 500 |
| Coupling torque (recommended) |
25Nm to 30Nm |
| Proof torque |
max. 35Nm |
| Interface |
| According to |
IEC 60169-4, VG 95250, EN 122190, DIN 47223 |
| Environmental Data |
| Temperature Range |
-40~+850C |
| Relative Moisture |
90%~95%, Temprature: 40±20C |
| Water Proof |
IP67 |
| Rapid Change of Temperature |
DIN EN 122190, Clause 4.6.7 |
| Corrosion |
DIN EN 122190, Clause 4.6.10 |
| Vibration |
DIN EN 122190, Clause 4.6.3 |
| Damp Heat |
DIN EN 122190, Clause 4.6.6 |
| Climate Test |
DIN EN 122190, Clause 4.6.5(55/155/56) |
| Material Plating |
| Connector Part |
Material |
Plating |
| Shell |
Brass |
Alloy |
| Center Contact |
Brass |
Silver |
| Back Nut |
Brass |
Alloy |
| Clamp |
Brass |
Alloy |
| Sealing |
Silicone rubber |
|
| Insulator |
PTFE (orTPX) |
Regulatory Compliances | RoHS Compliant
(S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007
